USER MANUAL WIRED CONTROLLER eiQ-WIREDCASCTRLC Read these instructions carefully and keep them safe for future reference.
CONTENTS SAFETY WARNINGS 3 INSTALLATION 4 CONTROL PANEL 5 DISASSEMBLY 7 SUPPORT 7 2
SAFETY WARNINGS Before attempting installation the Installation Manual must be fully read and understood. Check the product model and specification to ensure they meet the requirements of the appliance before installation. When choosing a suitable position for installation, consideration should be made to avoid external influences which may damage the unit, shorten its life, or make the unit unsafe. Places to avoid include: 1. Areas in the vicinity of flammable gasses. 2.
INSTALLATION Remove the wired controller from the backing plate using a flat head screwdriver in the gap between the backing plate and the controller. Once the two parts are separated, the remainder can be unclipped. Pass the signal wire through the opening in the rear of the backing plate, ensuring it is positioned so it will not be trapped or damaged during installation. Allow enough cable to pass through for ease of installation and future maintenance.
CONTROL PANEL Standard wire controller The panel is used to control the functions of the air conditioner, and display the settings currently selected.
ON/OFF BUTTON: Press to turn the air conditioner ON and OFF MODE BUTTON: When the air conditioning is on, the mode button is used to change the operating mode of the air conditioner between: Dehumidify Mode Auto Mode Heating Mode Cooling Mode TEMP+ AND TEMP- Fan Mode : These buttons are used to increase or decrease the temperature of the unit.
DISASSEMBLY Disassembly is the reverse of installation. Make sure that the mains power has been cut off to avoid risk of injury. Remove the wired controller from the backing plate using a flat head screwdriver in the gap between the backing plate and the controller. Once the two parts are separated, the remainder can be unclipped. Disconnect the signal wires from the rear of the wired controller.
