Manualshelf

Wired Controller for Cassette Air Conditioners

ManualsBrandselectriQ ManualsAir ConditioningWired Controller for Cassette Air Conditioners
1234567
4
INSTALLATION
Use the screws provided (M4x25) to fix the controller backing plate onto the wall,
ensuring that it is securely connected before proceeding. Depending on the type of
wall, suitable fixings should be purchased.
NOTE: Do not overtighten the screws, as this may cause the backing plate to distort or break.
Remove the wired controller from the backing plate using a flat
head screwdriver in the gap between the backing plate and the
controller. Once the two parts are separated, the remainder
can be unclipped.
Pass the signal wire through the opening in
the rear of the backing plate, ensuring it is
positioned so it will not be trapped or
damaged during installation. Allow enough
cable to pass through for ease of installation
and future maintenance.
Connect the signal wires to the rear of the
wired controller using the diagram below
for guidance if required.