Wired Controller for Cassette Air Conditioners

ON/OFF BUTTON:

Press to turn the air conditioner ON and OFF

MODE BUTTON:

When the air conditioning is on, the mode button is used to change the operating mode of

the air conditioner between:

Auto Mode

Heating Mode

Dehumidify Mode

Cooling Mode

Fan Mode

TEMP+ AND TEMP- :

These buttons are used to increase or decrease the temperature of the unit.

CHILD LOCK

Press and hold the TEMP+ and TEMP- buttons at the same time to lock the buttons on the

controller The LCD will display the lock icon when this is in effect. To deactivate the child lock,

press both buttons again at the same time.

TIMER BUTTON:

Use to set an On or Off timer with a duration between 1 and 24 hours.

ON TIMER – The timer will turn on the unit automatically after the time set has elapsed.

1. When on standby, press the TIMER button, then set the number of hours’ time you

desire the unit to start by repeatedly pressing the TIMER button.

2. Once the set time has elapsed, the unit will turn on automatically.

OFF TIMER – The timer will turn off the unit automatically after the time set has elapsed.

1. While the unit is operating, press the TIMER button then set the number of hours’

time you desire the unit to stop by repeatedly pressing the TIMER button.

2. Once the set time has elapsed, the unit will turn off automatically.

FAN BUTTON:

The fan speed button is only available in cooling, heating and fan modes. Press the fan speed

button to change between the available fan speeds.

SWING BUTTON:

Press the Swing button to activate the swing function on the air conditioner. Press the button

again to cancel swing mode.

ENERGY SAVING / QUERY BUTTON:

Press this button to enter energy saving mode. The desired temperature will be set to 26C,

and the unit will continue to operate in the current mode (cooling or heating).

Press and hold to enter into query mode. Use the TEMP+ and TEMP- buttons to view the

information screens for the unit. This includes the address and model HP of the unit, the

power consumption of the unit and the T1 temperature.