User Manual

12
OPERATION
Stop
The motor will stop running
Low
The motor runs at low speed
Mid
The motor runs at medium speed
High
The motor runs at high speed
Light
Turn the light on and off
MAINTENANCE
Before cleaning, switch the unit off and pull out the plug, or switch off at the relevant mains
switch if the unit has been hard-wired in. Make sure the unit has no power being fed to it.
REGULAR CLEANING
Use a soft cloth moistened with warm mildly soapy water or household cleaning detergent.
Never use metal pads, chemicals, abrasive material or a stiff brush to clean the unit.
NOTE: Do not use a steam-cleaner to clean the hood; electrical components could be
damaged or short-circuit as a result.
CLEANING THE FILTERS
Remove the filters by pulling the latch until the filter
cover comes off.
Put into a dishwasher with detergent, set the
temperature below 60 degrees. Or wash by hand
with warm soapy water, making sure to dry
thoroughly.
Make sure that the hood is disconnected from the
mains before cleaning or maintenance.
Replacement filters can be bought from the
supplier using the code eiqmidcar90chim
(Carbon)
eiqmchimfilter90 (Grease)