User Manual

13
CHARCOAL FILTER REPLACEMENT
Remove the metal grease filters. Remove the saturated activated charcoal
filter. Fit the new filters. Replace the metal grease filters.
LIGHT BULB REPLACEMENT
Before changing the bulb, ensure the hood is turned off and the power is disconnected before
attempting to change the bulb. Wait until the flitting has cooled down before commencing
replacement.
1. Remove the aluminum grease filter from the hood.
2. Locate the top of the bulb and begin to gently unscrew it until it is has come out of the unit.
Do not use force, as this may shatter the bulb and cause injury.
3. Replace with a new bulb, following the previous steps in reverse order.
4. Refit the aluminum grease filters.
IMPORTANT
• If a bulb is found to be defective, it should be replaced immediately.
• Always switch off the electricity supply before carrying out any operations on the appliance.
When handling the bulb, make sure it has completely cooled down before touching.