User Manual

10
BULB REPLACEMENT
• The bulb must be replaced by the manufacturer, its service agent or
similarly qualified persons.
• Always switch off the electricity supply before carrying out any operations
on the appliance. When handling bulb, make sure it is completely cool
down before any direct contact to hands.
• When handling globes hold with a cloth or gloves to ensure perspiration
does not come in contact with the globe as this can reduce the life of the
globe.
CHANGING THE LIGHTS
• Remove the grease filter.
• Press the spring splinter of both sides of the LED light to the inside until the light is
pressed out, see pic 1.
• Slightly pull the light connection wire out, and disconnect the light. See pic 2.
• Reverse the procedure to reinstall.
ILCOS D code for this lamp is: DSR-1.5/65-S-64
Max wattage: 2×1.5W
Voltage range: DC 12V