User Manual

7
INSTALLATION
If you have an outlet to the outside, your cooker hood can be connected as below
picture by means of an extraction duct (enamel, aluminum, flexible pipe or non-
flammable material with an interior diameter of 150/120mm).
Before installation, turn the unit off and ensure it is not plugged in.
Press the lock catch of metal Filter, remove
the Filter.
Remove the stainless-steel frame by
unfastening the 4 screw (M4*10).
Unfasten the screws (ST4*10), remove the lid of
terminal box, disconnect the wires to the
Commands at the connectors. Disconnect the
wires to the Light at the connectors.
Fasten the Hood in the cabinet by using the 12
screws (ST4*18).