User Manual

CARBON FILTER（OPTIONAL）

Activated carbon filters should be used to trap odours (optional – available from the same

stockist you purchased the hood from) and must be used if the hood is not vented to the

outside.

Reference: eIQCF160 Carbon Filter Pack

In order to install the activated carbon filters, the

aluminium filter should be removed first. Press the

lock and pull it downward as below:

Put the activated carbon filter onto the end of the

motor unit and turn it in anti-clockwise direction.

Repeat the same on the other side (see diagram)

NOTES:

• Make sure the filter is securely locked. Otherwise, it could loosen and cause damage

to the unit.

• When the activated carbon filters are attached, the suction power will be lowered.

• The charcoal filter cannot be washed or recycled. It should be changed at three or

six months according to the amount of use the hood receives. Replacements are

available from the stockist you purchased the hood from.

eIQCF160 Carbon Filter Pack