User Manual

16
LIGHT REPLACEMENT
IMPORTANT: The light fitting must be replaced by the manufacturer, its service
agent or similarly qualified persons
LED lamp:
1. Use the correct light: 2 x 1.5W LED.
2. Carefully take out the lamp with a suitable
tool.
3. Change the lamp.
TROUBLESHOOTING
Fault
Cause
Solution
Light on, but
fan does not
work
The fan blade is
jammed.
Switch off the unit. Repair to be
carried out by qualified service
personnel only.
The motor is
damaged.
Both light
and fan do
not work
Light blown
Replace the light with correct rating.
Power cord loose
Plug in to the power supply again.
Excessive
Vibration
The fan blade is
damaged.
Switch off the unit. Repair to be
carried out by qualified service
personnel only.
The fan motor is
not fixed tightly.
Switch off the unit. Repair to be
carried out by qualified service
personnel only.
The unit is not hung
properly on the
bracket.
Take down the unit and check
whether the bracket is in proper
location.
Suction
performance
not good
1 Grease filters
clogged
2 Distance between
the unit and the
cooking plane too
great.
1 Clean or replace grease filters.
2. Readjust the distance to between
70cm and 80cm.