User Manual

EXHAUST INSTALLATION

The following rules must be strictly followed to obtain optimal air

extraction:

• Keep the expansion pipe short and straight.

• Do not reduce the size or restrict expansion pipe.

• When using an expansion pipe always install the pipe pulled

taut to minimize pressure loss.

• Failure to observe these basic instructions will reduce the

performance and increase noise levels of the cooker hood.

• Any installation work must be carried out by a qualified

electrician or competent person.

• Do not connect the ducting system of the hood to any existing

ventilation system which is being used for any other appliance,

such as a warmer tube, gas tube or hot wind tube.

• The angle of the bend of the expansion pipe should be no less

than 120º; you must direct the pipe horizontally, or,

alternatively, the pipe should

go up from the initial point

and be led to an outer wall.

• After the installation, make

sure that the cooker hood is

level to avoid grease

collection at one end.

NOTE: Ensure the expansion pipe selected for installation

complies with relevant standards and is fire retardant.