User Manual

6
INSTALLATION OF THE FLAPS
The 2 air flaps should now be installed on the top of the unit, as access
is easier before the unit is wall mounted. The flaps should be carefully
installed, bending them slightly so the lugs at each end locate into the
holes in the outlet vent. When the unit is in operation the flaps pivot
upwards to allow airflow.
Please note: Ensure the small lugs at each end of each flap locate into
the holes on the housing and not the grooves above them.
After installing the flaps, ensure that they are able to pivot freely within
the outlet, before fixing the air outlet to the top of the unit using 2 x ST4*8
Screws.