User Manual

15
REMOVAL AND REFITTING OF THE GLASS
CANOPY
WARNING: Components within the appliance may
have sharp edges. When attempting to remove or
refit the glass, gloves should be worn to avoid
scratches and cuts.
The glass canopy is held into position using four screws, spacers and
decorative washers. Remove the four screws, spacers and decorative
washers from the glass canopy, ensuring the canopy is suitably
supported. Two people should then lift the canopy off the hood, retaining
the fittings removed for re fitting.
Refitting is the reverse of removal. Before refitting the hood, please
ensure the decorative trim is correctly located, and has not become
detached or displaced during disassembly.