Manualshelf

User Manual

ManualsBrandselectriQ ManualsChimney Hoods90cm Curved Glass Push Button Chimney Cooker Hood - Black
12345678910
7
OPTIONS FOR VENTILATION
This hood can be set up for either external venting or recirculation of the
air. The type of setup should be decided before commencing installation.
EXTERNAL VENTING
A 150mm diameter flexible pipe is provided which
allows the cooking odours to be extracted outside.
If this is the chosen installation method
consideration to the route of the vent pipe should
be made. The unit is also provided with an adaptor
allowing pre-existing 120mm ducting to be used to
vent the unit.
RECIRCULATION
This Cooker hood also supports the recirculation of
the air once it has passed through the filters. The
filtered air is then expelled through the vent holes in
the side of the chimney.
When setting the unit up in this configuration, carbon
filters should also be used to remove odours from
the air. Details of sourcing and fitting the filters can
be found in the Carbon filter section.