User Manual

9
1. Before installation, ensure you have not connected the appliance to the
mains supply.
2. The cooker hood should be placed at a
distance of 65~75cm above the cooking plane
for best effect.
• After confirming the cooker
hood height, measure the position of
the holes for hanging the hood and
inside chimney bracket. Drill 4 φ8
holes, 2 for inside chimney bracket
and 2 for hanging the hood, and
keep the hood level. The chimney
bracket should be secured at the
highest place of chimney.
• Screw two 4 x 30mm screws on the wall
with wall plugs to fix the hood, then use two
4mm x 40mm screws to fix the inside
chimney bracket. See Pic 2.
• Put the glass according to
the lead direction and way on
the cooker hood, and then
use the screws to fix the
glass. Install the outlet onto
the hood.
• Then attach the outlet,
converter and expansion
pipe (IF USING) as shown
below, and fix the pipe on the
converter by cable tie, then
lead the expansion pipe to
the wall outlet. See pic 3.