USER MANUAL 7KG TUMBLE DRYER eiQFFSTD7 Thank you for choosing electriQ Please read this user manual before using this Tumble Dryer and keep it safe for future reference. Visit our page www.electriQ.co.
CONTENTS SAFETY WARNINGS 3 PRECAUTIONS 5 KEY COMPONENTS 7 INSTALLATION 7 POSITION OF THE DRYER 7 ADJUSTING THE FEET 8 NOTES REGARDING POSITIONING 8 OPERATION 9 QUICK START 9 DRYING LABELS 9 BEFORE USE 10 CONTROL PANEL 11 FOLLOWING USE 12 DRYING PROGRAMMES TABLE 12 MAINTENANCE AND CARE 13 CLEANING THE FILTER 13 CLEANING THE CABINET AND DRUM 13 SAFETY CUT OUT 13 TROUBLESHOOTING 14 FAULT CODES 15 electriQ UK SUPPORT 15 DISPOSAL 15 PRODUCT FICHE 16 SPECIFICATION 16
SAFETY WARNINGS For your continued safety and to reduce the risk of injury or electric shock, please follow all the safety precautions listed below. Read all instructions carefully before using the appliance and keep them for future reference. Retain the manual. If you pass the unit onto a third party, make sure to include the manual.
from the socket. Do not pull the power cord. This appliance is intended to be used in household and similar applications and is not designed for use within a commercial environment. The lint trap has to be cleaned frequently. Lint must not to be allowed to accumulate around the tumble dryer. Do not dry unwashed items in the tumble dryer.
hazard. The appliance should not be overturned during normal use or maintenance. Remove all objects from pockets such as lighters and matches. For appliances with ventilation openings in the base, that a carpet must not obstruct the openings. The plug must be accessible after installation. Warning: The appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by a utility.
KEY COMPONENTS INSTALLATION POSITION OF THE DRYER The dryer should be placed in a ventilated area with a gap of at least 10cm between the rear of the unit and the wall. It is advisable to leave a space of at least 1.5 metres in front of the appliance. Do not restrict the ventilation.
ADJUSTING THE FEET Once the dryer is in its permanent position it should be checked to ensure it both level and stable. Using a spirit level the feed should be adjusted. NOTES REGARDING POSITIONING The appliance must be installed indoors. Do not install in a position where is may be exposed to rain or excessive moisture. Do not place the rear of the dryer close to curtains, or anything that could be caught by wind. Do not place the dryer near gas appliances or close to anything flammable.
OPERATION QUICK START Before use ensure the appliance is correctly installed, and there are no signs of damage.
BEFORE USE Ensure the laundry is thoroughly spun in the washing machine. This will reduce the drying time and reduce energy consumption. For best performance and uniform results, sort the laundry according to the fabric type and most appropriate drying program. Before drying, please ensure zips, hooks and eyelets, buttons and similar are fastened to prevent them catching during operation. Do not over dry clothes, because over dried clothes can become creased easily.
CONTROL PANEL On/Off Use to turn the appliance on and off. CHOOSE THE DESIRED PROGRAMME Program Press to choose between the 4 available functions: Mix, Cotton, Synthetic and 1 hour. CHOOSE THE EXTRA FEATURES REQUIRED Anti-Crease Dryness Press to turn on / off the anti-crease function. When activated the indicator light will be illuminated. Press to choose the level of dryness, between Iron Dry, Cupboard Dry and Extra Dry.
The symbol indicates the “standard cotton program, which is the most appropriate to normal cotton garments at the rated load. Using the Cotton Program with the Dryness set to Extra is ideal for cotton laundry and is the most efficient in terms of energy consumption for drying wet cotton laundry. FOLLOWING USE Once the drying function has finished the appliance will bleep. Press the On/Off button and unplug the appliance.
MAINTENANCE AND CARE CLEANING THE FILTER Clean the lint filter after each use. Remove by pulling straight up. To clean the filter wipe with a cloth to remove any lint which has accumulated. Allow the filter to dry before reinserting back into the appliance. CLEANING THE CABINET AND DRUM Use a soft damp cloth to wipe the cabinet and drum Do not directly rinse with water. Do not use scourers or scrapers Do not use alcohol, detergent or bleach wipes.
TROUBLESHOOTING You may try to solve the following simple problems by yourself. If they cannot be solved, please contact the after-sales department. Problem Will not start External hot or burning smell Clothes are too dry Clothes shrink Hairball on clothes Noises while operating. Air bumping Cause Solution Power cut. The power plug is not plugged tight. Appliance overloaded. The safety cutout has activated Check electricity supply.
FAULT CODES Failure indication Description Reason Action by Dryer Iron and Cupboard LED’s flashing Temperature Sensor error Temperature Sensor is open or PCB fault Current operation cancelled Extra LED flashing Temperature Sensor error Temperature Sensor is short or PCB fault Current operation cancelled electriQ UK SUPPORT www.electriQ.co.uk/support Call: 0333 043 6692 or complete the online form Office hours: 9AM - 5PM Monday to Friday www.electriQ.co.
PRODUCT FICHE Model Rated Capacity Dryer Type Energy Efficiency Class Weighted annual energy consumption(AEC) Automatic or Non Automatic EU Ecolabel Energy consumption of the standard cotton programme at full load Energy consumption of the standard cotton programme at partial load Power Consumption of the off-Mode (Po) Power Consumption of the left-onMode (Po) Duration of the left-on mode Programme time of the ‘Standard Cotton Program” eiQFSTD7 7Kg Air-Vented C 451.6kWh* Automatic N/A 3.81 kWh 2.
