User Manual

13
BULB REPLACEMENT
Before changing the bulb, ensure the hood is turned off and the power is
disconnected before attempting to change the bulb. Wait until the flitting has cooled
down before commencing replacement.
• Open the LED light plate assembly and take away the grease filter.See pic 1.
• Find the light wire at the back of the wire outlet.Then slightly pull the light connecting
wire out, and dismantle the terminal of the light connecting wire. See pic 2.
• Remove 4pcs screws on the hinge of light plate assembly,take out the light plate
assembly and pull out the light wire.If the light wire cannot be pulled out, it can be cut
directly with scissors.
• Apply the reverse procedure to install the light back.
ILCOS D code for this lamp is: DSS-22/65-S-505/295
MAX WATTAGE
22 W
VOLTAGE RANGE
DC 12V
DIMENSIONS
505×295MM