User Manual

8. Slide the inner

chimney

upwards and

connect it to

Plate 2 using the

two remaining

4mm x 8mm

screws.

Before using the hood, read all the instructions and make sure that the voltage

(V) and the frequency (Hz) indicated on the identification plate (found inside

the cooker hood) and all the data inside the appliance are exactly the same as

the voltage and frequency in your home. Then plug the power lead into the

power socket (or if connecting directly to the main via a switched spur, ensure

the work is carried out by a competent, qualified person) and the cooker hood

is then ready for use.

OPERATION

Touch control with LED display

Button

Function

Power Button – Allows the hood to be turned on and off

Speed Button – Allows the fan speed to be changed. The

current fan speed is displayed on the panel

1 – Low, 2 – Medium, 3 - High

Lamp Button – Turns the lights on the underside of the hood

on and off

Timer Button – While the fan is running, this button can be

pressed to start a 9-minute timer which turns off the fan. The

display will show the number of minutes operation remaining,

and the timer can be deactivated at any point by pressing the

timer button again.