User Manual

CARBON FILTER (Available separately)

Activated carbon filters can be used to trap odors, and must be used if the hood is not vented

to the outside. They are available from the same stockist you purchased the hood from under

the following reference:

eIQTMCARBONCHIM (Carbon Filter Pack of 2)

In order to install the activated carbon filter, the metallic anti-grease filter should first be

detached. Press the lock and pull it downward.

Put the activated carbon filter into the unit, fix it by turning them clockwise it at each end of the

motor (see diagram below)

Repeat the same on the opposite side.

NOTE:

• Make sure the filter is securely locked. Otherwise, it could loosen and cause damage to

the unit.

• When the activated carbon filters are attached, the suction power will be lowered.

• The charcoal filters cannot be washed or recycled. They should be changed at three or

six months according to the amount of use the hood receives. Replacements are

available from the stockist you purchased the hood from.