User Manual

INSTALLATION

Before installation, ensure you have not connected the appliance to the mains supply.

1. The base of the cooker hood should be placed at a distance of

70~80cm above the cooking plane for best performance.

2. Drill 3 holes to accommodate the wall bracket. Screw and

tighten the wall bracket onto the wall with the screws (4mm x

30 mm) and wall plugs provided.

3. Hang the appliance onto the wall bracket

hook and fix the appliance using the 2 screws

(4mm x 30mm).

5. Plates I and II are used to fix the chimney onto the

wall. Slide the inner chimney on to the outer chimney

and place in position on top of the hood. Mark the

position for plate II. Then slide the inner chimney

upwards to the desired height, and mark the location

for plate I.

6. The holes to accommodate the two plates can then

be drilled, and both the brackets fixed to the wall using

two screws (4mm x 30mm) and wall plugs for each.

NOTE: Fixing the chimney to wall plate is done at the

end of installation.