User Manual

8
PREPARING FOR INSTALLATION:
Ensure the power has been
turned off at the mains before
beginning installation.
Connection to the mains supply
must be in an accessible
location. To install this hood
you will require two assistants.
You may need the following
tools to complete this
installation:
 Drill appropriate for your
wall
 Phillips Screwdriver
 Tape Measure
 Hand Saw or Jig Saw
Electrical wiring must be done
by a qualified person in
accordance with all applicable
codes and standards, including
fire rated construction.
Do not discharge the exhaust air into a flue from other appliances
burning gas or other fuels.
The cooker hood must be placed at a minimum distance of 65cm
above the cooking surface of a hob.