User Manual

OPERATION

Press the ON/OFF button to start the heater. To adjust the desired temperature, press the

SET button and then adjust using the + and – buttons.

SETTING THE DAY AND TIME

• When the heater is operating and the timers are off, press the SET button 3 times so that

the day is flashing and use the + and – buttons to adjust.

• Then press the SET button once so that the hour is flashing and use the + and – buttons

to adjust.

• Next press the SET button once so that the minute is flashing and use the + and – buttons

to adjust.

NOTE: The clock will be reset to default when the unit is turned off using the power switch

on the side, or when the power is disconnected.

CHILD LOCK

Press the + and – buttons at the same time to enable child lock. In child lock mode the

control panel is deactivated. To exit child lock mode, press the + and – buttons again at the

same time.

OPEN WINDOW FUNCTION

While the unit is operating, press and hold the MODE button for 3 seconds, a buzzer will

sound and the open window symbol will be displayed .

Press and hold the MODE button for 3 seconds to deactivate the feature.

When this function is activated , the heater will stop working when the room temperature

drops by 3℃ within 1 minute.

24-HOUR TIMER

The inbuilt standby timer will allow you to set the unit to turn off after a set period of time.

Please note this timer is a one-use timer, and starts operation when programmed.

1. While the heater is operating and timers are off, press the SET button twice to

activate the timer. The 24-hour timer symbol will display on the screen.

2. Use the Temperature + and – buttons to adjust its duration in 1-hour intervals.

3. Once the set time has elapsed, the unit will turn off automatically.

Press the POWER button before the time has elapsed, the timer will be cancelled and the

unit will turn off.