User Manual

OPERATION
TURNING ON
The unit should be turned on using the power switch on the
side. The unit has 3 modes. Press the SET button to
change the heater into the desired mode. The current mode
will be indicated on the display
Standby Mode
On
Weekly Timer Mode
SETTING THE
DAY AND TIME
With the heater in Standby Mode:
Press and hold the MODE button to set the hour VALUE.
Press and hold the MIN button to set minute VALUE.
Press and hold the SET button to set the day.
HEAT LEVEL
Press the HEAT LEVEL button to change between high
heat setting and low heat options:
Low Heat.
High Heat
TEMPERATURE
Use the UP and DOWN buttons to adjust the desired
temperature (Range of 5°-40°C). The display shows the
current temperature on the left and the desired toom
temperature on the right.
CHILD LOCK
Press and hold the HEAT button for 5 seconds and the
lock symbol will be displayed. All buttons are deactivated.
To exit the child lock, press and hold the HEAT button
again for 5 seconds. The child lock can also be set from the
remote control.