User Manual

WEEKLY
TIMER
Change the heater into Weekly timer mode.
Press the button to choose between the following pre-
programmed heating periods:
1. Mon. to Fri.
2. Mon. to Sat.
3. Every day
4. Mon., Wed., Fri.
5. Tues., Thur., Sat.
6. Weekend
7. Mon. to Wed.
8. Thur. to Sat.
9. Permanently on
Once the preset has been chosen, start and stop times
should be set for the full 24 hours which will be operational
for each of the days in the above heating period.
Use the UP button to set a start time and the DOWN
button button to set the stop time.
While the unit is operating under the weekly timer, it will
heat upto the temperature set within the ON mode.
Notes:
When the room temperature reaches the desired level, the heater will
change to Low Heat mode. When room temperature is 2 degrees over
the desired temperature, the heater will enter standby mode. The heater
will resume operation when the temperature drops 2 degrees below the
desired temperature