User Manual

10
STEP 8: Insert 6 projecting ends of
each Mesh Guard (4) into the seat slots
of Support Bar–Upper (3) as shown in
picture. Fix all Mesh Guards (4) except
the front side.
STEP 9: Fix Rubber Ring (6) into the bottom of Glass Tube (5). Insert the top end of glass tube into the bottom
hole of Flame Screen (2) as much as possible. Keep glass tube vertically and sit it in the hole of Plate Cover (8).
NOTE: GLASS TUBE IS FRAGILE PART, PLEASE HANDLE GLASS TUBE CAREFULLY AND SLOWLY!
STEP 10: Assemble Mesh Guard (4) in the front.
Loose 4pcs screws to keep 4pcs Guard Fastening
Plates down and firmly in place.
STEP 11: Insert the feet of door into the bottom slots.
Attach the Chain (7) to the hook of Burner Assembly
(9) and close the door.
Note: Model H1507 doesn’t take this Chain.