User Manual

7
PART
PART NAME
PICTURE
QTY
DESCRIPTION
AA
M5 CAP NUT
4
TO CONNECT REFLECTOR AND
FLAME SCREEN
BB
M5 CREWS &
WASHER
44
M5 X 8 SCREW & M5 WASHER
CC
M5 F TAPPING
SCREWS & WASHER
18
ST4.2X9.5 SELF TAPPING
SCREWS & M5 WASHER
Note: Some of the fittings may be provided pre-attached to the unit.
PATIO HEATER ASSEMBLY
Required Tools: Philip Screwdriver / Adjustable Spanners / Wrenches
Leak Detection Solution: One-part detergent and three parts water
Before assembly, ensure all packing material and any transit protection is removed. Remove the door from the main
body, and remove all the parts packed within it.
STEP 1(Optional): Connect the BRACKET (N) and
WHEELS (M) to the base of the Main Body using the M6
SCREWS, WASHERS and NUTS (CC and DD)
STEP 2: Keep the burner with the ignition side up. Fix
the BURNER ASSEMBLY (J) to MAIN BODY (K) using
4 M5 SCREWS and WASHERS (BB).