Instruction Manual

Page 10 of 24
CONNECTING THE APPLIANCE TO WIFI
DOWNLOAD THE APP TO YOUR PHONE
Download the” TUYA SMART” app, from your chosen app store, using the QR codes below, or by
searching for the app in your chosen store.
MODES AVAILABLE FOR SETUP
It is recommended to use Bluetooth connection to connect your unit to Wi-Fi. This is the easiest
connection method and will ensure that no time is wasted in getting to use your new heater to its
fullest potential.
To connect the unit to Wi-Fi via Bluetooth connection, ensure your mobile phone has Bluetooth
enabled and simply plug the heating element in, the unit will now be in connection mode. You can
then follow the steps in the below section to link the unit and customize your app.
To turn the Wi-Fi using AP connection, press and hold the FUNCTION button for 3-5 seconds until
the display shows lines moving in a clockwise direction. A timer will also appear in the center of the
display for 3 minutes. After the 3 minutes has elapsed, the unit will then default to Bluetooth
connection. Follow the above steps to re-enter AP connection.
ANDROID
IOS