Instruction Manual

Page 13 of 24
CONNECTING USING THE BLUETOOTH CONNECTION METHOD
Before initiating the connection, make sure your mobile phone has Bluetooth enabled and that the
unit is plugged in. Also ensure your phone is connected to the WiFi network. (We advise turning
mobile data off during setup).
2. Select your Wi-Fi and enter
your Wi-Fi password, this is
usually found on the back of
your router.
3. Your device will then begin to
connect. Once successfully
connected, press next.
4. Your smart controller will now be ready to use, press done to
access the control screen. See page 16.
1. Open app and enter the
home screen. Turn the
unit on and on the app,
press add device.