Instruction Manual

Page 14 of 24
CONNECTING USING AP MODE (ALTERNATIVE METHOD)
Before initiating the connection, make sure the unit is in standby mode, with AP mode activated. If
not follow the instructions for changing the WiFi connection mode. Also ensure your phone is
connected to the WiFi network. (We advise turning mobile data off during setup)
1. Open app and press “+” to
add device, or use the add
device button
2. When the devices in
connection mode, it will
appear at the top. Press
add to add the device.
3. Press on the AP mode
button in the top right of the
screen.
4. Ensure the unit is still
displaying the countdown,
then press on the orange
button at the bottom of the
screen to confirm
5. Enter your WiFi password
and press confirm.
6. Go to network settings in your
phone and connect to the
“SmartLife xxx” connection.
There is no password to
enter. Then return back to the
app to complete setup.
This will then transfer the settings to the heater.
Once the connection process has completed, go back to the network settings on your phone to ensure
your phone has reconnected to your WiFi router.