Instruction Manual

Optional Accessories Assembly and Operation

The HSL600-ACC kit will transform your juicer in a true Nutrition Centre that will enable you to

easily cook a variety of foods. Please find assembly / operation instruct

Mincer, Pasta/ Noodle/ Sausage Maker

Slide the juicing screen (12) into the end of the auger (11) making sure is properly pushed down.

Make sure you do not skip this step as using the juicer without juicing screen may damage the

extractor.

Attach the mincer body (14) to the HSL600 base (2)

Make sure the body triangle mark is aligned with the triangle

mark of the mincer before rotating the mincer body.

Rotate the mincer counterclockwise until it clicks in being

secured by the accessory lock (4)

Align the hexagonal shaft of the mincer auger (15) in the

frame of the mincer body (14) and push it into place (slightly

rotate the auger to make sure you got a good alignment)

Position the cutting blade onto the mincer auger (15), with

the square hole in the center of the cutter embedded into the

square convex plate on the top of the screw.

Make sure the grinding plate (17) is clean and in position over

the cutting blade (16).

The mincer body has guide keys and the blade will slot into

them.