Instruction Manual

Initial use

Preparation

• Clean the appliance and accessories before first use

• Wash the juicer body and head, juicing screen, auger, pusher, juice cup and pulp cup in

warm soapy water with a soft cloth or nylon brush. Rinse and dry thoroughly. Also refer to the

section "Cleaning and maintenance"

Assembly and Operation

Before assembly or disassembly, switch off the appliance, remove the mains plug from the wall

socket and wait until the appliance has cooled down.

This appliance has a built-in safety lock (4); this feature ensures that you can only switch on the

appliance if you have assembled the juicer correctly on the motor unit. When assembled

correctly, the built-in safety lock will be unlocked.

Assembling the Juicer

Before you assemble the juicer, ensure that the power cord is unplugged. Place the juicer base

on a flat dry surface such as a worktop.

Attach the extractor body (10) to the HSL600 base (2)

Make sure the juicer body triangle mark is aligned with the

triangle mark of the extractor before rotating the extractor

body.

Rotate the extractor counterclockwise until it clicks in being

secured by the accessory lock (4)

Align the hexagonal shaft of the auger (11) in the frame of the

extractor (10) and push it into place (slightly rotate the auger

to make sure you got a good alignment)

Slide the juicing screen (12) into the end of the auger (11)

making sure is properly pushed down. Make sure you do not

skip this step as using the juicer without juicing screen may

damage the extractor.

Align the juice extractor head (13) with the keys on the juice

extractor body and twist the extractor head by rotating it