USER MANUAL HVSF16B HVSF20B 16 / 20 INCH HIGH VELOCITY STAND FAN Thank you for choosing ElectriQ Please read this user manual before using this air circulator and keep it safe for future reference. Visit our page www.electrIQ.co.
CONTENTS SAFETY INSTRUCTIONS 3 FEATURES AND ASSEMBLY 4 CONTROL PANEL AND SETTINGS 5 MAINTENANCE 6 TROUBLE SHOOTING 6 TECHNICAL DATA 7 SUPPORT 8 2
SAFETY INSTRUCTIONS Important! • Carefully read the instructions before operating the unit • This appliance is for indoor use only. • Rating: This unit must be only connected to a 220-240 V / 50 Hz earthed outlet. • Installation must be in accordance with regulations of the country where the unit is used. • If you are in any doubt about the suitability of your electrical supply have it checked and, if necessary, modified by a qualified electrician. • This fan has been tested and is safe to use.
HVSF16B / HVSF20B 16 / 20-Inch High Velocity Cool Air Circulator Stand Fan with 3 Speed Settings SPECIFICATIONS ⚫ Slim design takes minimal space ⚫ High Speed Motor with 3 Fan Speed Settings ⚫ Adjustable Tilt Head PARTS LIST Fan Housing Mounting Bracket x 2 Bracket Nuts and Bolts x 4 Support Tube Base FAN ASSEMBLY 1. Attach the fan housing to the support tube using a mounting bracket at either side, to clamp both pieces into position before securing with the 4 Bracket Bolts and Nuts. 2.
OPERATION 1. Set your fan on a level dry surface. 2. Before plugging into the wall outlet adjust the fan head to your desired angle: loosen the mounting screws then tighten them back in position. 3. Plug the power cord into a standard 220~240 V wall outlet. CONTROL PANEL AND SETTINGS Twist the control knob from the 0 and select the appropriate speed Low (1) Medium (2) High (3) INSTALLATION This unit can easily be moved from one room to another.
MAINTENANCE CLEANING AND STORAGE ATTENTION: Please shut off the unit and unplug from the mains before cleaning or performing any maintenance. Cleaning the surface Clean the grills with a duster or a soft wet cloth. Do not use chemical solvents (such as benzene, alcohol or gasoline) as they may cause irreversible damage. Make sure no water enters the control panel or fan motor Do not run the unit until completely dry. Place the fan in its original box or cover the fan to protect it from dust.
TECHNICAL DATA: Model HVSF16B HVSF20B High Velocity Fan Speed 3 Blade size 400 mm 500mm Cable length 1.5 meters Rated Input 90W 120W Running Current 0.37A 0.52A Air Flow 3800 m³/hr (2300 6000 m³/hr (4800 CFM) CFM) Noise Max 50dB Max 60dB Power Supply 230V/50Hz 230V/50Hz Net Weight 8 kg 9.6 kg Gross Weight 8.8 kg 10.
electriQ UK SUPPORT www.electriQ.co.uk/support Call: 0330 390 3061 or complete the online form Office hours: 9AM - 5PM Monday to Friday www.electriQ.co.uk Unit J6, Lowfields Business Park Lowfields Way, Elland West Yorkshire, HX5 9DA Disposal: Do not dispose this product as unsorted municipal waste. Collection of such waste must be handled separately as special treatment is necessary. Recycling facilities are now available for all customers at which you can deposit your old electrical products.