Instruction Manual

Page 7 of 21
OPERATION
SETTING THE AIRFLOW ANGLE
•
Stop the fan
• Hold the fan body with one hand, set the angle of the fan 15° forwards or backwards with
the other hand
.
SWITCHING ON AND OFF
•
Connect the power supply. The LED display lights up, the machine goes into standby mode.
•
Press the fan’s power button. The fan will beep once and start.
• Press and hold the fan’s power button for two seconds. It will beep twice and when you
release your finger the fan will stop
.
ADJUSTING THE AIR FLOW
•
With the fan running, press the ‘+’ and ‘-‘ buttons to adjust the air flow from 1 to 9.
OSCILLATION
•
With the fan running, press and hold the Touch Screen button (see page 5) for one second.
It will beep once and begin to oscillate left and right. Press and hold for another second to
stop oscillating.
UV STERLISATION FUNCTION
•
Turning on the UV sterilisation feature activates a UV lamp inside the device which is effective
in killing harmful bacteria such as white staphylococcus.