Instruction Manual

ManualsBrandselectriQ ManualsFloorcareBORT Pet Robot Vacuum Cleaner 3500Pa Suction

OPERATION

The product has different cleaning modes to cater for different cleaning needs. The

cleaning mode can be chosen on the robot, on the remote control or on the app.

AUTOMATIC

CLEANING

The robot will scan the immediate environment and generate a

map in its internal memory. It will then clean the room in S-shape

cleaning patterns and finally clean around the perimeter of the

room.

To activate: with the robot in standby mode, switch on the power.

After hearing the robot voice prompt, press the start button or

press “ ” on the remote control or in the app. The robot will then

start to clean.

SPOT

CLEANING

This mode is useful where there is cleaning required concentrated

on one area. With the robot on standby/suspend, press the spot

cleaning button and the robot will clean in a spiral shape from its

starting position. After cleaning the robot will return to the start

position.

To activate: press the spot cleaning button in the app or on the

remote:

BORDER

CLEANING

The robot cleans along the perimeter or the room and returns to

the charging station once border cleaning is completed.

To activate: press the button on the remote control or start on

app.

MANUAL

CONTROL

To control the robot manually use the arrow buttons on the

remote control.

SUCTION

ADJUSTMENT

Press the button on the remote control or in the app to

adjust suction levels.

PAUSE

During operation of the robot press the “Start” button or the pause

button on the remote / app.

WAKE UP

After three minutes of inactivity, the robot goes into sleep mode

and all indicators turn off. You can use any buttons on the robot

or app to wake it up. If it has been inactive for more than 20

minutes, on the Start and Go Home buttons can wake it.

SHUT DOWN

After the robot has completed its task and come to rest, press the

main power switch at the side of the robot to shut down.

Note: it is recommended that after the robot has completed its

task, it is returned to the charging station to fully recharge the

battery. It not in use for a long time, then it can be shut down.