Instruction Manual

9
CHARGE YOUR ROBOT
Place the charging station against a
wall on flat, level ground. Keep the
charging station free of obstructions
0.5m to the left and right and 1.5m in
front.
Turn on the power switch
There are two ways to charge the robot:
a. On the charging station
b. Charging directly from the power adapter
When charging, the indicator light flashes. When it is complete the indicator turns green.
During cleaning the robot monitors its own charge level and returns to the charging
station when required. You can also put the robot into recharging mode by pressing the
button on the remote control or on the app.
Please note:
• Do not operate the charging station in areas with strong reflections such as direct
sunlight or mirrors. If this is unavoidable please cover the reflective surfaces up to
7cm from the bottom.
• Please fully charge the robot before first use. Charging time is approximately 6
hours.
• For electrical safety and to prevent leaking to the floor, do not charge the robot
with the water tank fitted.
• During charging do not press any button other than
BATTERY CARE
To get the most from your robot’s battery, please charge product fully before any
expected long periods of inactivity.
To prevent the battery from self-discharging please recharge every three months.
If it reaches a level of deep discharge it may not be able to recover. In this case please
contact product support