User Manual

12
QUICK START GUIDE
• Ensure the charging base and robot have been set up following the instructions on
the previous page.
Press the POWER button to start cleaning. The robot will map out the room and start off
at the edges of the room.
Press the HOME button to return the robot to the charging base to empty and charge.
The robot will also return to the base when it has finished cleaning or when the battery is
low. Note: Power must be connected to the base for the home function to work correctly.
Press and hold the POWER button for 5 seconds to change the WI-FI setup mode. See
the APP Control section for more details.
Alternatively, much more functionality can be gained by using the supplied remote
control or the smart app.
STATUS LIGHTS ON THE ROBOT
LED
Reason
Power Button Flashing Red
Robot is stuck and needs assistance.
It will stop cleaning until fixed.
Power Button Flashing White
The Robot is recharging.
Power Button Constant White
The Robot is cleaning.
WI-FI Indicator Rapid Flashing White
The Robot is in WI-FI connection mode.
WI-FI Indicator Constant White
The Robot is connected to the WI-FI.
Home Button Flashing White
Returning to charging base.
HOME BUTTON
POWER BUTTON
WI-FI INDICATOR