User Manual

13
REMOTE CONTROL
POWER
Press the power button to change the unit between Sleep mode
(Ready to work) and Standby (Power saving). The robot will also
automatically enter standby if left inactive for 10 minutes.
PLAN
CLEANING
With the unit in Sleep mode, press the
PLAN CLEANING button to enter plan
cleaning mode. The robot will travel
around the edge of the room, avoiding
any obstacles before cleaning the room
in an S shaped pattern.
SPOT
CLEANING
With the unit in Sleep mode, press the
SPOT CLEANING button to enter spot
cleaning mode. The robot will intensively
clean a specific area in a spiral pattern
except when too close to the charging
base or other obstacles. This mode is
especially useful if there is a
concentrated area of dust or debris. The
unit will stop cleaning after two minutes.
Power On/Off
Display
Return for Auto Charging
Direction
Clock Setting
Schedule Setting
Plan Cleaning
(Smart Cleaning)
Suction Cleaning
Spot Cleaning
Confirm