User Manual

14
MANUAL
CLEANING
The arrow buttons can be used to take control of the robot vacuum,
Press the UP and DOWN buttons to move forwards and
backwards, and the LEFT and RIGHT buttons to rotate. Press the
PLAY/PAUSE button on the centre to turn the suction on and off. If
no input is received for 10 seconds the robot will enter standby.
RETURN TO
HOME
Press the RETURN TO HOME button to stop the current operation
and the robot cleaner will return to the base unit. It will first enter
the base in reverse to empty the dust box, before leaving the base,
turning around, and then re-entering to charge.
Note: During the return to home function, the robot may pause in
position a number of times, while it accurately works out the
movement needed to ensure a reliable connection with the base.
The vacuum will also return to home when the planned cleaning is
finished, or when the battery level is low.
SUCTION
BUTTON
VACUUM MODE: When the dust box is attached, press the
suction button to change the suction level between 1 and 2. The
indicator on the remote will show the current setting.
MOP MODE: When the water tank is attached, press the suction
button to change the water output level between 1 and 2. The
indicator on the remote will show the current setting.
CLOCK
BUTTON
Press the CLOCK button to set the clock. Use the UP and DOWN
arrows to change the time and the LEFT and RIGHT buttons to
change between hours and minutes. Press the PLAY/PAUSE
button to confirm the time set.
SCHEDULE
BUTTON
The Schedule can be used to set a daily start time for the robot.
Press the SCHEDULE button to activate the Schedule, and use the
UP and DOWN arrows to change the time and the LEFT and
RIGHT buttons to change between hours and minutes. Press the
PLAY/PAUSE button to save the scheduled start.
A much more comprehensive timer can be set using the App.