Instruction Manual

6
ASSEMBLY
CLEANING CLOTH
The robot has two cleaning wheels on its underside.
Each wheel requires a cleaning cloth, which is in turn held in place by a cleaning ring.
Take the cleaning ring, and warp the cleaning cloth over it. Take the assembled ring and
cloth and press it onto the cleaning wheel.
CONNECTING THE POWER SUPPLY
The robot window cleaner requires connection to the power supply at all times of
operation. Referring to the diagram below/following page,
1. Insert the ‘figure of 8’ jack into the power supply.
2. Insert the DC output jack from the power supply into the socket of the extension
cable.
3. The right-angled jack of the extension socket is then inserted into the power
supply socket on the robot (see previous page) and the nut is tightened.
4. Attach the safety harness to a suitable position above the window.
5. Insert the mains plug into a mains socket and switch on.
Cleaning ring
Cleaning cloth