Instruction Manual

7
Once the power is switched on, check the fan is creating suction and that the status
indicator lights are OK. Place the robot on the window, keep it away from the window
frame initially. Check that the suction can hold the device, then let go.
To remove the device, use one hand to gently pull the safety harness, and use your
other hand to remove the robot.
BACKUP BATTERY
Should the power supply fail, an internal battery will provide power for up to 30 minutes.
The device will continue to operate but a warning sound will be emitted along with a
flashing red light. At this point the user should recover the machine from the window to
prevent a loss of power and a fall.
OPERATION
CLEANING WINDOWS
For best results work in dry and sunny weather.
STEP1：DRY WIPE
For the first run it is advised to operate the unit dry, without water, to remove dust from
the window. This prevents a build up of mud on the window and poor results.
‘figure of 8’
jack
Mains
Power
Supply
Extension
cable (4m)
Safety
harness