User and Installation Manual

7
REMOTE CONTROL
The remote control has a range of up to 8m. Point
the remote control at the receiver in the interior unit.
A beep confirms that the remote control signal has
been received.
REMOTE OPERATION
Turn the appliance on using the ON/OFF button. This
activates the most recently used setting.
The ON/OFF button also turns the air conditioner off.
*Horizontal swing not available on most models and
the horizontal direction must be adjusted manually.
No.
Button
Function
1
Down
Press to decrease the desired room temperature.
2
Up
Press to increase the desired room temperature.
3
Power
Press to turn the unit on or off.
4
Fan
Press to select the fan speed between LOW, MED and HIGH.
5
Timer
Press to set the timer.
6
Sleep
Press to activate the “SLEEP” function
7
Eco
Press to turn eco mode on or off.
In cooling mode eco mode slowly increases the desired temperature by 2
o
C.
In heating mode eco mode slowly decreases the desired temperature by 2
o
C
8
Mode
Press to change between the different modes.
9
Turbo
Press to activate turbo mode. This will make the unit work in high
performance mode to quickly cool or heat the room for a period of 15
minutes. The fan will be set to max, the temperature will be set to either
16
o
C in cooling mode or 31
o
C in heating mode.
10
Swing
Select the vertical direction of airflow (Horizontal direction not adjustable on
these models)
11
Mute
Press to reduce the fan speed to produce the lowest possible wind noise.
12
Display
Press to turn on/off the LED display.
13
Health
Press to activate the ioniser function (Not applicable)
14
I Feel
Press to activate the follow me function.
15
(MODE+TIMER)
Press to activate the child lock function. All buttons on the remote are locked
until the child lock is deactivated.