User Manual

ATTACHING THE BOTTOM COVER

Note: Attachment of the bottom cover is optional. The bottom cover is designed to give the bottom of the

unit a more attractive appearance when the unit is mounted at a height and the underside is visible.

Following installation, use a

screwdriver to remove the 4 rubber

feet and the water tank braket from

the underside of the appliance.

Place the bottom cover plate in position on

the underside of the appliance, with the lips

pointing up ( small lip at the rear of the

unit)

Attach the bottom plate using the screws

removed from the feet. When fitting the

bottom plate, all 4 screws should be fitted

loosely, so the position of the plate can be

adjusted before fully securing into position.