User Manual

CONNECTING USING AP MODE (ALTERNATIVE METHOD)

Before initiating the connection, make sure the unit is in standby mode, with the WIFI light flashing

once per second. If not follow the instructions for changing the WIFI connection mode. Also ensure

your phone is connected to the WIFI network. (We advise turning mobile data off during setup)

1. Open app and press “+” to

add device, or use the add

device button

Once the connection process has completed, go back to the network settings on your phone to ensure

your phone has reconnected to your WIFI router.

2. Select the type of device

as “Air Conditioner” in the

“Small Home Appliance” tab.

3. Ensure the correct network is

shown and that the password

is correct before pressing

next.

4. Press on the EZ mode

button in the top right of the

screen, and use the drop

down menu to select AP

Mode.

5. Ensure the WIFI light on the

air conditioner is slowly

flashing, tick the box to

confirm the speed of

flashing and press Next.

6. This will then transfer the

settings to the air conditioner.

Wait for this to complete. If

this fails, retry. If still

unsuccessful please review

the troubleshooting section for

further help.