User Manual

5
OPERATION
POWER BUTTON:
Press to turn the air conditioner ON and OFF
MODE BUTTON:
While the air conditioner is operating press the mode button to change between the 4 modes. The
current mode will be shown on the display.
Heating Mode
Dehumidify Mode
Fan Mode
Cooling Mode
TEMP AND BUTTONS
These buttons are used to increase or decrease the desired room temperature. Both the current
temperature and the desired temperature are shown on the display.
CLOCK BUTTON
Press the clock button to set the current time. Use the TIME and buttons to adjust the time. After
a few seconds of been set, the clock will start to operate.
TIMER BUTTON
Use to set the desired time for the unit to turn on or off. Please note the time must have been set on
the unit before the timer can be used.
ON TIMER – The timer will turn on the unit automatically after the time set has elapsed.
1. With the unit is standby, press the TIMER button so that the ON TIMER symbol is shown on the
display.
2. Use the TIME and buttons to set the desired start time.
3. Once the set time has elapsed, the unit will turn on automatically with the settings that were
operating before the unit was turned off.
OFF TIMER – The timer will turn off the unit automatically at the set time.
1. While the unit is running press the TIMER button so that the OFF TIMER symbol is shown on
the display.
2. Use the TIME and buttons to set the desired stop time.
3. Once the set time has elapsed, the unit will turn off.
FAN BUTTON
The fan speed button is only available in cooling, heating and fan modes. Press the fan speed button
to change between the available fan speeds.
SWING BUTTON
Press the Swing button to activate the swing function on the air conditioner. Press the button again to
turn off swing mode.
SILENT BUTTON
Press silent to enter the unit into silent mode. Silent mode will operate the same as described in the
air conditioner’s manual. The unit will run at the lowest fan speed. To exit silent mode, press any
button.