USER MANUAL electriQ 12,000 BTU PORTABLE AIR CONDITIONER WITH HEATPUMP AND WIFI P12HPW Thank you for choosing electriQ Please read this user manual before using this innovative Air Conditioner and keep it safe for future reference. Visit our page www.electriQ.co.
CONTENTS SAFETY INFORMATION 3 FEATURES 5 PARTS LIST 5 INSTALLATION 6 OPERATION 8 REMOTE CONTROL 9 EMPTYING THE INTERNAL WATER TANK 10 WIFI APP CONTROL 11 SETTING UP THE APP 12 CONNECTING THE AIR CONDITIONER 13 CONTROLLING YOUR DEVICE 15 SMART SCENES 18 CLEANING AND MAINTENANCE 21 TROUBLESHOOTING 22 ERROR CODES 22 SUPPORT 23 TECHNICAL SPECIFICATION 24 2
SAFETY INSTRUCTIONS Important! • Carefully read the instructions before operating the unit • This appliance is for indoor use only. • Rating: This unit must be only connected to a 220-240 V / 50 Hz earthed outlet. • Installation must be in accordance with regulations of the country where the unit is used. • If you are in any doubt about the suitability of your electrical supply have it checked and, if necessary, modified by a qualified electrician. • This air conditioner has been tested and is safe to use.
• R290 refrigerant gas complies with European environmental directives. • R290 has a low GWP (Global Warming Potential) of 3. • This air conditioner contains around 280 g of R290 refrigerant gas. • Do not use or store in an unventilated space with an area smaller than 18.2 m2 per unit.
FEATURES • • • • • • • • 4 in 1 Cooling, Heating, Fan, Dehumidifier. The P12HPW is great for Rooms up to 30 m2. 3 speed fan: Balancing quiet operation with performance. 24 Hours Start / Stop Timer. Digital Thermostat. Remote Control. Smart WIFI app control Auto-Restart to retain the settings in the event of power failure. Castors for Enhanced Portability.
INSTALLATION WARNING: Before using this unit, please keep it upright for at least 3-4 hours. This unit can easily be moved from one room to another. While moving the unit please note that it must always be kept upright and then placed on an even surface. 1. Attach the fishtail connector to the end of the hose, by extending the end and twisting until firmly attached (At least 3 full rotations). 2.
NOTES: • • • • • The window kit is only designed to be installed with sliding or sash windows or doors. The window kit is not designed or to be used with any other style of windows. The fish tail adaptor can be used without the slide bar with most windows / doors. When using the air conditioner ensure that the opening left around the fishtail is as small as possible as the cooling will be less efficient. The best form of installation is through a wall duct.
OPERATION Press the POWER button to turn the unit ON or OFF. Press the MODE button to cycle between the 3 modes, the indicator for the selected mode will be illuminated. COOL: The room is cooled with the cold air expelled through the front air outlet while hot air is expelled through the vent pipe. The desired room temperature can be set between 16 and 32 degrees using the + and – buttons, and the fan speed can be changed using the SPEED button.
REMOTE CONTROL POWER TEMP + POWER TEMP - SPEED MODE SLEEP Press to turn the unit on or off. Press to decrease the desired temperature or TEMP timer duration. Press to increase the desired temperature or TEMP + timer duration. SPEED Press to change between the three fan speeds. SLEEP Press the sleep button to enter sleep mode. Press to change between Auto, Cool, Heat and MODE Fan modes. NOTE: The design of the remote may vary from the diagram, due to continuous product improvement.
EMPTYING THE INTERNAL WATER TANK MANUAL DRAINAGE: When the internal water tank is full the unit will stop working. Shut off the unit and unplug. Try not to move the model abruptly as this may cause the water in the internal tank to spill out. Place a tray under the lower water plug or place the unit in a drainage area. Unscrew the drain plug cap and remove the rubber stopper - water will drain from the internal tank. Put the rubber stopper back and screw the drain plug cap back into place.
WIFI SMART CONTROL BEFORE YOU START • • • • Ensure your router provides a standard 2.4ghz connection. If your router is dual band ensure that both networks have different network names (SSID). The provider of your router / Internet service provider will be able to provide advice specific to your router. Place the air conditioner as close as possible to the router during setup.
REGISTER THE APP 1. Press on the Sign Up button at the bottom of the screen. 4. A verification code will be sent by the method selected in step 3. Enter the code into the app. 2. Read the Privacy policy and press the Agree Button. 5. Type in the password you would like to create. This needs to be 6-20 characters, with letters and numbers. 12 3. Enter your email address or phone number and press continue to register. 6. The app is now registered.
CONNECTING USING EZ (QUICK CONNECTION) MODE Before initiating the connection, make sure the unit is in standby mode, with the WIFI light flashing twice per second. If not follow the instructions for changing the connection mode. Also ensure your phone is connected to the WIFI network. (We advise turning mobile data off during setup) 1. Open the app and press “+” to add device 4.
CONNECTING USING AP MODE (ALTERNATIVE METHOD) Before initiating the connection, make sure the unit is in standby mode, with the WIFI light flashing once per second. If not follow the instructions for changing the WIFI connection mode. Also ensure your phone is connected to the WIFI network. (We advise turning mobile data off during setup) 1. Open the app and press “+” to add device 2. Select the type of device as “Air Conditioner (WIFI)” within the Large Home Appliance tab. 3.
CONTROLLING YOUR DEVICE THROUGH THE APP Add Device: Add a device to the app, and go through the setup process. THE HOME SCREEN Voice Control: Use to give verbal instructions to the app. Your Device: Press to enter the device screen. Home: Return to this screen when within the Smart or profile tabs. Profile: Provides the option for changing settings, and adding devices using a QR code provided by a friend.
DEVICE SCREEN The device screen is the main control screen for the air conditioner, providing access to the controls to amend the functions and settings Edit Name: Use to change the name of Back: Returns to the the air conditioner.
CREATING ROOMS 1. ON THE HOME SCREEN Press on Home Management button 2. Type in a name for your home, 3. Press on the location button to select the location of your home. (See SETTING YOUR LOCATION below) 4. New rooms can be added by pressing the ADD ANOTHER ROOM option at the bottom. (See ADD ANOTHER ROOM below) 5. Untick any rooms that are not required on the app. 6. Press DONE in the top right corner SETTING YOUR LOCATION ADD ANOTHER ROOM Use your finger to move the orange HOME symbol.
SMART SCENES Smart Scenes is a powerful tool providing the option to customise the operation of the air conditioner based both on conditions within the room and outside influences. This gives the user the option of specifying much more intelligent actions. These are split into two categories Scene and Automation. SCENE Scene allows for a one touch button to be added to the Home screen. The button can be used to change a number of settings in one go, and can change all the settings within the unit.
AUTOMATION Automation allows an automatic action to be set up for the device. This can be triggered by the Time, indoor temperature, humidity of the room, weather conditions, and a range of other influences. 1. Press on the Smart Scene tab at the bottom of the Home screen 2. Press on the Plus in the top right corner to add a smart scene. 4. Select the condition when the automation should start. A number of triggers can be combined. 3.
PROFILE TAB The profile tab gives you the option to edit both your detail, and use the added features of the unit. CHANGING THE NAME OF YOUR DEVICE When in any of the device screens further settings for the device can be accessed, by pressing on the three dots in the top right-hand corner. The top option within this allows you to change the name of the device to something relevant to the use of the product, such as “Living Room Air Conditioner”.
CLEANING AND MAINTENANCE PLEASE TURN OFF THE UNIT AND UNPLUG FROM THE MAINS BEFORE CLEANING OR PERFORMING ANY MAINTENANCE CLEAN THE SURFACE Clean the surface of the machine with a wet soft cloth. Do not use chemicals, such as benzene, alcohol, gasoline, etc; otherwise, as this may cause damage to the surface and or the internal workings of the machine AIR FILTER CLEANING If the filter screen is clogged with dust, the effectiveness of the air conditioner is reduced.
TROUBLESHOOTING Do not repair or disassemble the air conditioning. Unqualified repair will invalidate the warranty and may lead to failure, causing injuries and property damage. Only use it as directed in this user manual and only perform operations advised here. Problems The air conditioner does not work. The cooling effect is not good Reasons Solutions There is no electricity. Turn it on after connecting it to a socket with electricity. The display shows "E4". Discharge the water inside.
APPENDIX Disposal: Do not dispose this product as unsorted municipal waste. Collection of such waste must be handled separately as special treatment is necessary. Recycling facilities are now available for all customers at which you can deposit your old electrical products. Customers will be able to take any old electrical equipment to participating civic amenity sites run by their local councils.
TECHNICAL DATA Model Cooling capacity: Heating Capacity Cooling Input Power: Heating Input Power Fan P12HPW 12,000 BTU 11,800 BTU 1300 W 1150 W AC motor with 3 fan speeds. Air flow volume: 420 m³/h Cooling Input Current: 5.65 A Heating Input Current: 5.0 A Refrigerant: R290/280g Sound power level: 56 dB(A) Thermostat: 16-32oC Maximum working pressure of 1.0/3.5 MPa suction/exhaust side: Maximum Allowable Pressure 3.
