User Manual

9
REMOTE CONTROL
NOTE: The design of the remote may vary from the diagram, due to
continuous product improvement.
MULTI PROTECTIVE FUNCTIONS
FROST PROTECTION
In COOL, DRY or AUTO modes, if the temperature of the exhaust is too low, the machine will automatically stop
operating until the temperature has risen.
OVERFLOW PROTECTION
When the water in the internal water tank exceeds the warning level, the machine will stop operating and sound
an alarm with the LCD display showing “E4”. To resume operation, empty the internal water tank. After the
water is emptied, the machine will automatically return to the original state.
AUTO-DEFROST
The machine has automatic defrosting function. If during operation the temperature of the internal coils drops
too low, the unit will enter a defrost cycle to prevent the build-up of ice within the unit.
AUTOMATIC THERMAL PROTECTION
To protect the service life of the machine, the machine has automatic thermal protection. If the temperature
within the unit is outside of the specified range, the compressor and the lower motor will stop operation. The
appliance will automatically return to normal operation after the temperature of the machine recovers.
COMPRESSOR PROTECTION
To prevent damage to the compressor there is a 3-minute delay start protection function.
POWER
Press to turn the unit on or off.
TEMP -
Press to decrease the desired temperature or
timer duration.
TEMP +
Press to increase the desired temperature or
timer duration.
SPEED
Press to change between the three fan speeds.
SLEEP
Press the sleep button to enter sleep mode.
MODE
Press to change between Auto, Cool and Fan
modes.
POWER
MODE
TEMP +
TEMP - SPEED
SLEEP