User manual

Page 12 of 16
WATER-DRAINAGE
1. Manual drainage:
1.1 When the internal water tank is full the unit will stop working.
1.2 Shut off the unit and unplug. Try not to move the model abruptly as this may
cause water to spilt out from internal water tank.
1.3 Place a tray under the water plug.
1.4 Screw off the water plug and unplug the water blocker - water will drain from the
container.
1.5 Put the water blocker back and screw the water plug back into place
2. Continuous drainage:
2.1 Screw off the water plug and unplug the water blocker.
2.2 Use a water pipe to connect to the water outlet.
2.3 You can plumb this pipe into your current plumbing system, lead it outside or
use a water pump.
Note: This model has a self-evaporative function, which reduces the need to empty the
water tank.
If the unit is vented correctly most of the water is reused to cool the condenser coils and
any excess is evaporated.
Please do not use continuous drainage if you intend to use the self-evaporating facility.