User manual

Page 8 of 16
OPERATION AND SETTINGS
This portable air conditioner boasts four functions: cooling, heating, dehumidifying and fan.
The fan has three speeds: high, medium and low
Temperature range settings are: 18--30
0
C
The unit will also display operating function, temperature, fault diagnostic and protective
functions on the LCD screen.
1. Control instruction
：
：：
：
Control panel：
：：
：
1.1 When plugged in the unit is automatically in standby status.
The digital screen will display the room temperature (Range: 5-35℃/41-95℉)
If ambient temperature is above 35℃, “H” will be displayed.
If it is below 5 ℃, it will display “L” and the unit will enter standby status to protect
components.
1.2 ON/OFF button: Press this button to turn the unit on and enter cooling mode.
Press again and the unit will switch off.
1.3 Mode button ：
Press this key to choose Cooling, Heating, Fan, or Dehumidifying Mode.
1.4 Fan button ：
a) In Fan and Cooling mode:
HIGH（ ）→MEDIUM（ ）→LOW（ ）
b) In Dehumidifying mode, the fan is set to low speed
1.5 Stop / Start button ：
Press the icon to select your desired operating times.
Use the and buttons to adjust hours and minutes.
You can only set the auto-shut off timer while the unit is operating (on)
You can only set the auto-start timer while the unit is switched off
After you have set the timer the icon will keep flashing until the start/ stop
time. If you change the timer, previous settings will be cleared.
Up
Mode Sleeping Swing
Fan
Speed
Max cool
Down
On/Off
Timer
Display
Area
IR Signal
Receptor