User Manual

Page 6 of 10
INSTALLATION
1. Push the two parts of the base together
ensuring that the power cable is fed through
the center.
2. Line up the tower fan on the base and fix the 4
screws into position using a screwdriver
3. Press the power cable into the two clips in the
underside of the base, so that it runs out of the
rear of the base.
OPERATION
Once assembled your fan may be operated by using either the manual controls located on the top of the
fan or by your remote control.
CONTROL PANEL AND SETTINGS
1
2
3
4
5
6
7
8