USER MANUAL TF38OSCT12RW 36 INCH TOWER FAN Thank you for choosing electriQ Please read this user manual before using this air circulator and keep it safe for future reference. Visit our page www.electriQ.co.
CONTENTS SAFETY INSTRUCTIONS 3 FEATURES 5 DIAGRAM 5 INSTALLATION 6 OPERATION 6 CONTROL PANEL AND SETTINGS 6 LCD DISPLAY 7 REMOTE CONTROL 8 MAINTENANCE 8 TROUBLESHOOTING 9 TECHNICAL SPECIFICATION 10 SUPPORT 11 Page 2 of 11
SAFETY INSTRUCTIONS Important! • • • • • • • • • • • • • • • • • • • • • Carefully read the instructions before operating the unit This appliance is for indoor use only. Rating: This unit must be only connected to a 220-240 V / 50-60 Hz earthed outlet. Installation must be in accordance with regulations of the country where the unit is used. If you are in any doubt about the suitability of your electrical supply have it checked and, if necessary, modified by a qualified electrician.
• Avoid keeping the unit in direct sunlight for a long period of time Energy Saving and Unit Safety Protection Tips • Do not cover or restrict the airflow. Do not use in dusty environment. • For maximum performance the minimum distance from a wall or objects should be 50cm. Warning: To reduce the risk of fire or electrical shock, DO NOT USE THIS FAN with any SOLID-STATE Speed Control Device or any variable speed controllers.
TF38OSCT12RW 38 Inch Tower Fan with 3 Speed Settings FEATURES • • • • • • • Slim design takes minimal space LED Display showing the current temperature. High Speed Motor with 3 Fan Speed Settings Swing Function 12-hour standby timer. Remote Control allowing all functions to be changed. Choice of modes allowing the operation of the unit to be adjusted to the environment.
INSTALLATION The base of the tower fan comes in two parts, which fit around the oscillation base. Both parts fit easily together. The back half is the one with cut-outs for the power supply cord. 1. 2. 3. First attach the front half of the base, aligning the holes in base with the screw holes in the base of the fan, and lead the power cable through the center hole. Then attach the back half of the base to the front half and secure to the main body with the four supplied screws.
3. MODE /STYLE BUTTON Press to cycle through the modes. Standard Mode: The fan will operate normally Breeze Mode: The fan speed will vary to imitate a natural breeze. Sleep Mode: The lights on the unit are extinguished, and the fan speed will reduce by 1 level every 30 minutes until on Low fan speed, and will then continue to run at that speed. 4. TIMER BUTTON Press repeatedly to increase the running time in 30-minute intervals. The timer can be set between 30 minutes and 7.5 hours. 5.
REMOTE CONTROL The Buttons on the remote have the same effect as the buttons on the main control panel. 1 2 3 4 5 Power Button Speed Button Swing Button Timer Button Mode Button 2 3 4 5 The remote contains a button cell battery (CR2025) MAINTENANCE CLEANING AND STORAGE ATTENTION: Please shut off the unit and unplug from the mains before cleaning or performing any maintenance. Cleaning the surface Clean the grills with a duster or a soft wet cloth.
TROUBLESHOOTING Do not repair or disassemble the unit by yourself, unauthorized repair attempts will invalidate the warranty and may cause bodily harm. Issue No power Possible Reason 1. Power cord is unconnected 2. The There is no power from socket 3. The power switch is not on. 4. The fuse has blown Odour emission 1. New unit. When the unit is used for from unit the first time the fan motor may produce and odour which will dissipate within a week of use Strong vibrations 1.
TECHNICAL DATA Description Value Unit Model TF38OSCT8RW Fan Speeds 3 Cable length 1.5 meters Rated Input 45 Watt Running Current 0.2 Amps Air Flow 39.63 m3/min Noise MAX 57.4 dB(A) Power Supply 220-240/50-60 V/Hz Net Weight 3.2 kg Gross Weight 4.05 kg Net Size (assembled) 315x315x960 mm Gross Size (packed) 980x186x169 mm TF38OSCT8RW Description Maximum Fan Flow Rate Symbol F Value 39.63 Fan Power Input P 46.
electriQ UK SUPPORT www.electriQ.co.uk/support Please, for your own convenience, make these simple checks before calling the service line. If the unit still fails to operate call: 0330 390 3061 or complete the online form 1. Is the unit plugged into the mains? 2. Is the fuse OK? 3. Switch the unit off and wait three minutes to see if the issue is resolved. Restart the unit. Office hours: 9AM - 5PM Monday to Friday www.electriQ.co.
