Instruction Manual

Page 10 of 26
SETTING THE TIME
When the unit is powered on, press the
function button until the Timer image is
displayed on screen. Then, press and hold
the function button to set the time. Use
the increase and decrease buttons to
adjust the hour value between 0-23 hours.
After you have set the hours, press the
function button once to set the minutes.
Use the increase and decrease buttons to
adjust the minutes between 0 and 59
minutes. Press the function button again
to confirm the time and begin
programming the timer.
PROGRAMMING THE TIMER
Ensure that the above steps have been
followed before programming the timer.
You can then use the increase and
decrease buttons to set the hour in which
the unit will be working between 23-00
hours. Press the function button once to
confirm the hours you have set and move
onto the next day (1-7) and follow the
previous step to set the hour the unit will
be functioning for each day.